- measuring with a very small spot
    
Product's top features:

• a unique versatile meter
• a truly compact and smart structure: All components required are in the meter, just plug in the power & communication cable. No external control boxes needed
• most reliable: an extremely long service period of 175 000 hours
• based on new ultra-stable technology developed by Visilab
• the measuring distance is 250 +/-20 mm, spot approximately 10 mm in diameter. Other working distances at request, like  270 +/- 40 mm with a spot of 15 mm in diameter
• a variant exists with a bigger spot and a wider operating range

• extremely low noise level
• highly immune against external IR radiation and any lighting
• highly immune against external water vapor
• good immunity to target angle
• the meter is delivered with a cable and software, ready to start operating after connecting it to 24 Volts
• interfaces from a single cable: Voltage output, serial port
    • two voltage outputs, one 4-20 mA, range selectable, source selectable as moisture or web temperature etc., scaling
    • serial port RS232-USB for PC data acquisition and configuration, data rates 9600/115200 bauds. The lower rate is suitable for cables longer than 7 meters.
• Advanced program with full data acquisition features for several meters simultaneously and with Composer expert system and many other highly useful features. This is a licensed product and belongs to the AK50 meter's delivery bundle. The new program Profiler is specialized for scanner use and available with the Advanced program. It has full scanner data acquisition features.

• free AK30 program package using the serial port with full data acquisition features
• the PC programs support data acquisition with up to 50 samples/s in normal trend display at 115200 baud rate
• memory banks for sample series taken with an autotimer (selectable time intervals)
• unique capability of capturing moisture transients at full speed for further analysis (minimum sample interval 14 ms)
• standardization algorithm built-in for using an external moisture standard. It can be started with a single command via the serial port
• purge air inlet with a quick connect adapter for standard 8 mm air tubing    
• use Low Power Mode when not in active service
• really competitively priced

• A strong IP67 box of size 270x120x270 mm, made of anodized Aluminum. An AISI nose box 170 mm long is optional for hard environments. The optional box is smaller with a much bigger spot (inquire)
• designed and manufactured by Visilab in Finland

    • Moisture standard -STD for regular checking and compensating against dirty glasses
    • A different working range, other than 250 mm